Top Commercial and Residential Siding Options

Siding is one of the most important elements of commercial and residential buildings. The right siding material can be key to a nice-looking finished product that weathers well and also serves to protect the building's structure. The cost of new siding can vary widely, as can the maintenance required for specific materials. In addition to appearance, or curb appeal, these are the top considerations when choosing a siding material for your next building project. 

of 07

Vinyl Siding

vinyl siding on a house
J Rodriguez / Getty Images

The best things about vinyl are that it's easy to install, it's relatively inexpensive, and it's very low-maintenance. Vinyl siding never needs painting and can stand up to cold, wet climates and even coastal air. While vinyl may resemble traditional clapboard or lap wood siding from a distance, it's clearly not as attractive as wood up close. The flexibility of siding also means it follows exterior wall contours and can even rattle in high winds.

Insulated vinyl siding, which is conventional vinyl with a form-fitted rigid-foam backing, is a much stiffer and installs flatter than standard ("hollow-back") vinyl, but it comes with a significant cost increase. 

of 07

Wood Siding

Wood siding
Olger Fallas Painting / Getty Images

Wood siding is prized for its looks and for being a natural material that looks like a natural material. (You can't say the same about most other types of siding.) Wood siding comes in many different forms, from traditional clapboards to board-and-batten to shingle to tongue-and-groove planks. 

High-quality wood siding is also quite durable and long-lasting if it's properly maintained. And therein lies one of wood's greatest drawbacks: lots of maintenance. Wood siding must be painted or stained regularly or it is vulnerable to rot, weathering, and damage from sunlight and insects. The other drawback of wood is its high cost. 

of 07

Fiber-Cement Siding

Cement Siding
World_Citizen / Flickr

Fiber-cement siding is perhaps the best wood alternative. When painted, it looks convincingly similar to traditional wood clapboard or shingle siding. Fiber-cement also comes in sheet form that mimics vertical board siding or plywood siding. 

Fiber-cement typically is painted, like wood, but it is somewhat lower-maintenance because the material itself is less prone to weather and moisture damage than wood, and it doesn't expand and contract like wood. It also doesn't rot and is insect-resistant. Fiber-cement is durable once it's installed, but it's quite brittle and can chip or break easily during installation. It is priced similarly to mid-grade wood siding.

of 07

Aluminum Siding

Aluminum Siding
webhamster / Flickr

Aluminum siding saw its heyday several decades ago but is still around as a low-maintenance siding option. Aluminum is lightweight and essentially fireproof, rot-proof, and rust-proof. Because it never needs paint and comes in styles that simulate wood siding, aluminum is considered an alternative to vinyl. Aluminum is less flimsy than vinyl and doesn't share its plasticky look. On the downside, aluminum is prone to denting and is considerably more expensive than vinyl.   

of 07

Brick Siding

brick veneer
Oula Lehtinen / Getty Images

Natural brick is a premium siding material and by far the most expensive of the standard options (excluding high-end wood siding). Brick is primarily used for its solid, natural look and its undeniable beauty. Brick is also very low-maintenance (especially if you never paint it) and is fireproof, rot-proof, and insect-proof. 

Brick siding is a veneer product; that is, it does not provide structural support for the wall. Most brick siding is thinner than standard building brick and can be installed onto wood-frame and masonry walls. Brick siding can crack due to excessive movement or shifting in the wall or building foundation. However, in most cases, the only maintenance it needs is an occasional repair to mortar joints. 

of 07

Stucco Siding

Stucco Mix
StillWorksImagery / Getty Images

Stucco is one of the oldest siding materials and is prized for its distinctive appearance and superb durability. Traditional cement-based stucco is applied to wood or masonry walls in three coats. The topmost coat contains the stucco's finished color. Stucco can also be painted, but, as with painted brick, this creates an unnecessary regular maintenance issue. 

A popular alternative to traditional stucco is EIFS, or "synthetic stucco," a polymer-cement material that is sprayed onto insulation board or other materials. Synthetic stucco isn't quite as attractive or durable as traditional three-coat stucco, but it is less prone to repairs such as cracking and can be about one-third less expensive.   

of 07

Stone Veneer Siding

Stone veneer
Aaron of Nepa / Flickr

Manufactured veneer stone is a concrete-like product that mimics natural stone. One type is made up of individual pieces that are installed with mortar; another type is a panel form that is fastened to the wall.  Veneer stone is low-maintenance and highly durable, much like brick siding. It is considerably less expensive and easier to install than natural stone (which is rarely used as an applied siding) and cheaper than brick. On the downside, it doesn't always look completely natural.