10 Flat Iron Success Tips

Get a Smooth, Sleek 'Do Every Time

If you're not getting the results you want when you flat iron your hair, it may not be the iron — it could be your technique. Try these 10 tips for flat ironing for a smooth, sleek finish!

01
of 10

Begin with Well-Conditioned Hair

Hair that's well-conditioned produces better flat ironing results.
CareyHope/E+/Getty Images

Before you even turn on that flat iron, ask yourself this: is my hair well-conditioned and moisturized? If it's not, turn that iron off and tend to your hair first. Sometimes, we think that a good heat protectant product is supposed to do all the work, but that's not true. You have to do your part to make sure you're only applying direct heat to hair that's in a condition to handle it without doing further damage. Only flat iron hair that's been regularly conditioned and cared for; otherwise, applying heat to dry, brittle hair is only prolonging the inevitable — a major cut.

02
of 10

Flat Iron Clean Hair

The best time to flat iron your hair is immediately following a fresh shampoo and conditioning session (and deep conditioning if necessary). You have to press clean hair; applying heat to hair that has products and dirt in it is doing nothing more than baking these old products and dirt in. Need a touch up during the week? Flat iron once more, with minimal heat, but that's it; flat ironing is not for every day.

03
of 10

Use Smoothing Balm or Serum

After shampooing and conditioning, apply a smoothing balm or serum to your hair. This helps much more if your hair is chemical-free, but relaxed ladies can benefit from it, too. Look for humidity-resistant formulas if you live in a climate where moisture-filled air makes a frizzy mess of your straightening work as soon as you step out the door.

Check out some recommended balms and serums on Amazon.com: 

04
of 10

Use Heat Protectant

Once your hair is dry, apply a heat protectant to each section of hair before you flat iron it. Don't get fooled, though — a heat protectant helps, but even the best brand won't hold up to heat that's too high. Stick to the minimum temperature you can use to get good results. Although many flat irons reach a max of 450 degrees, you don't have to crank yours up this high if you can straighten your hair at 340.

Check out two heat protectant sprays on Amazon.com:

05
of 10

Avoid Oil Before Ironing

Applying a natural oil after you iron is fine. Sometimes you need a little weight afterward, but don't put oil on your hair ​before you press it. You won't get that lightweight, bouncy look you're after if your tresses are coated in oil.

06
of 10

Only Flat Iron Dry Hair

For the best, longest-lasting results, only flat iron completely dry hair. Does this mean you have to blow dry it straight first? Not necessarily. You can always wet wrap your hair and sit under a hood or bonnet dryer until it's dry — this is a gentler drying method and the wrapping technique smooths your hair just like blow-drying would. You can also let your hair air dry until it's about 80% dry, and then blow dry it the rest of the way. Flat ironing hair that's not completely dry will cause it to frizz up.

07
of 10

Go Slow and Steady

Try not to flat iron when you're in a hurry. This is a technique that requires slow, controlled movement but don't let the iron sit in one place for any length of time. Move it, but don't rush it. Begin as close to the roots as you can and pull the iron down in one smooth motion. If you hurry through it, you may have to go over that section again (and again). Remember: the less heat, the better. Making one good pass is better than making three or four mediocre ones.

Also, the "comb or brush chase" method works wonders in helping to straighten (particularly natural hair) with just one pass. It's as simple as running a fine-toothed comb or boar bristle brush down the length of each section, right in front of the iron. This method smooths the hair and ends before the iron touches them, resulting in incredibly sleek locks.

08
of 10

Adjust the Temperature as Needed

Just because your iron heats up to 450 degrees doesn't mean every part of your hair requires that much heat. For women with natural hair, finding out that they have two or three different textures on one head may be a shock, but it's not uncommon. Your crown area may be the curliest section, requiring high heat, but the hair on the sides of your head may be straighter, so turn the heat down when pressing that section.

09
of 10

Iron Small Sections

Smaller irons (1 1/2 inches or less) are better for tackling small sections of hair. Try not to press pieces wider or thicker than 1 inch at a time. You'll do a better job of straightening the entire section when you don't have to deal with too much hair. Big, chunky sections won't straighten properly.

10
of 10

Wrap Hair at Night

Now that your flat ironing job is complete, don't ruin all your hard work with no nighttime care! Wrap your hair at night and cover with silk or satin before bed. This way, your morning routine consists of little more than taking your hair down and combing through it. You already have the slight curve and volume — no more heat is required.